How to Program a Subaru Garage Door Opener
Chicago’s Leading Garage Door Repair Company
Programming a Subaru Garage Door Opener: A Step-by-Step Guide
Are you a Subaru owner? If so, learning how to program your Subaru garage door opener is an essential task for many drivers who want the convenience of entering their garage without the hassle of getting out of the car to manually open the door, which is something that can come in handy if you live in Chicago’s Cook County or Lake County. Programming Subaru’s built-in garage door opener, the HomeLink system, is straightforward.
Step 1: Clear Existing Codes
Before you start programming your Subaru garage door opener, it’s essential to clear any existing codes that might be stored in the system. To do this, follow these steps:
- Turn your Subaru’s ignition to the “ON” position.
- Press and hold the two outer buttons on the HomeLink system (usually located on the rearview mirror or overhead console) for approximately 20 seconds.
When the indicator light begins to flash rapidly, release the buttons. This indicates that any previously stored codes have been erased.
Step 2: Program Your Garage Door Opener
Now that your Subaru’s HomeLink system is ready for programming, follow these steps to synchronize it with your garage door opener:
- Locate your garage door opener’s “Learn” or “Smart” button. This button is typically found on the opener’s motor unit, near the antenna wire, and may be concealed behind a panel or light cover.
- Press and release the “Learn” or “Smart” button. A small LED light should illuminate, indicating that the unit has entered programming mode. You’ll have 30 seconds to complete the next step.
- Return to your Subaru and firmly press and hold the desired HomeLink button for two seconds, then release it. Repeat this process up to three times, or until the garage door starts to move.
Once the garage door moves, your Subaru’s HomeLink system is successfully programmed to your garage door opener.
Step 3: Program Additional HomeLink Buttons (Optional)
If you have more than one garage door opener, you can program additional HomeLink buttons by repeating Step 2 for each opener. This will allow you to control multiple garage doors using the same HomeLink system in your Subaru.
If you’re having trouble programming your Subaru garage door opener, consider these troubleshooting tips:
- Check your garage door opener’s compatibility. Some older models may not be compatible with the HomeLink system. Consult your garage door opener’s manual or contact the manufacturer for compatibility information.
- Replace the batteries in your garage door opener’s remote control. Weak or dead batteries may prevent proper programming.
- Ensure you’re within the recommended distance when attempting to program your HomeLink system. The ideal distance is typically 1-3 inches from the garage door opener’s “Learn” or “Smart” button.
For Help Programming Your Subaru Garage Door, Contact USA Garage Door Repair
Programming a Subaru garage door opener is a relatively simple process that provides the convenience of hands-free garage access. Following the steps outlined in this guide, you can easily program your Subaru’s HomeLink system and enjoy the benefits of a synchronized garage door opener.
If you’re having a hard time or would prefer professional assistance with programming or installing a garage door opener, please contact USA Garage Door Repair. Our expert technicians can help you with all your garage door opener needs in Chicago, Lake County, and Cook County. So call us today, and let us make your garage door opener programming and installation experience a breeze!